High quality Europolis Plus reinforcement mesh is produced from the Europolis Plus smooth or Europolis Plus ribbed cold rolled steel wire crossed under a right angle, and then connected with electric resistant welding at the junction point.
This mesh, apart from the top-quality mechanical characteristics, is especially characterized by the weld quality provided by the specifically constructed machine for this new type of electric resistant welding.
Regardless of the manner of handling Europolis Plus reinforcement mesh, especially during its loading, transport and unloading, there is no possibility of fission in the welding.
Reinforcement mesh is produced on the machines of the most renowned manufacturers in this field: Schlater Switzerland, EVG Austria, Teurema, Vitary.
Europolis Plus welded reinforcement mesh is made of:
- Europolis Plus smooth cold rolled steel wire, EŽG B500A, ø4 – ø12 mm diameter;
- Europolis Plus ribbed cold rolled steel wire, EŽR B500A, ø4 – ø12 mm diameter.
- The mechanical characteristics prescribed by the SRPS EN 10080:2008 standard are:
- Conventional yield stress Rp02 – min 500 MPa; max 650 Mpa;
- Tensile strength and conventional yield stress ratio Rm/Rp02 – min 1.05 (1.02 for measures below 8 mm);
- Total elongation at maximum power Agt – min 2.5 % (1.0% for measures below 8 mm).
-
Production Range
-
R - meshes
Dimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t) ≤ 400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Production range
Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by wire so they can be easy for loading and transportation
When placing an order be sure to emphasize:
TYPE x L (length)
Quantity needed (either in kg or pieces) -
Q - meshes
Dimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t)≤400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Production range
Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by wire so they can be easy for loading and transportation
When placing an order be sure to emphasize:
TYPE x L (length)
Quantity needed (either in kg or pieces) -
T - meshes
The Europolis Plus Reinforcement Welded Mesh is manufactured from Europolis Plus smooth or Europolis Plus ribbed cold rolled steel wires crossed at right angles and then connected by electric resistance welding at the crossing point.
Beside the supreme mechanical characteristics, this mesh is especially characterized by the weld quality done by a specially constructed machine for this type of electric resistant welding.
Regardless of the method of handling of Europolis Plus Reinforcement mesh, especially during loading, transport and unloading, there is no possibility of fission in the welding.
Dimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t) ≤400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Production range
Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by wire so they can be easy for loading and transportation
When placing an order be sure to emphasize:
TYPE x L (length)
Quantity needed (either in kg or pieces) -
Rx - meshes
Identical to R-mesh, except the overhang on one side is a lot longer than overhang on the other side, and they are defined by specific needs.
Dimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t)≤400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by a wire so they can be easy for loading and transportation.
When placing an order, be sure to emphasize:
TYPE x L (length)
Overhang x1, x2 and y1, y2
Quantity needed (either in kg or pieces)
-
Qx - meshes
Identical to Q-mesh, except the overhang on one side is a lot longer than overhang on the other side, and they are defined by specific needs.
Dimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t)≤400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by a wire so they can be easy for loading and transportation.
When placing an order, be sure to emphasize:
TYPE x L (length)
Overhang x1, x2 and y1, y2
Quantity needed (either in kg or pieces) -
S - meshes
Length (L) and width (B) are variables, and mesh mass is separately calculated where :
Bmax=2500mm
Bmin=1250mmØD- the profile of the longitudinal wire is constant over the whole width of the mesh
Ød – the profile of the transversal wire is constant over the whole length of the meshLongitudinal spacing a1,a2…an…min 100mm
Transversal spacing t1,t2…tn…min 50mmDimensional characteristic of mesh
a – Axial spacing of longitudinal wires [mm]
t – Axial spacing of transversal wires [mm]
Condition t≤3a and (a+t) ≤ 400 mm
L – mesh length [mm]
B – mesh width [mm]
D – the diameter of longitudinal rod [mm]
d – the diameter of transversal wire [mm]
X1, X2 – overhang longitudinal wires [mm]
Y1, Y2 – overhanging transversal wires [mm]Ordering
Europolis Plus Reinforcement welded mesh is packed in packet up to 2.000 kg, tied up by a wire so they can be easy for loading and transportation.
When placing an order, be sure to emphasize:
TYPE x D x d x a x t x L x B
Quantity needed in kg or pieces
Drawing of the special mesh -
Implementation
-
Quality
